Vehicle
Wiring Details for your
2007-2011 Ford Ranger Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2011 Ford Ranger . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+) |
@ IGNITION SWITCH, GRAY 13-PIN PLUG, PIN 2 |
| STARTER |
BLUE/WHITE (+) |
@ IGNITION SWITCH, GRAY 13-PIN PLUG, PIN 5 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
WHITE/ORANGE (+) |
@ IGNITION SWITCH, GRAY 13-PIN PLUG, PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BROWN/YELLOW (+) |
@ IGNITION SWITCH, GRAY 13-PIN PLUG, PIN 8 |
| ACCESSORY/HEATER
BLOWER 2 |
PURPLE/GREEN (+) |
@ IGNITION SWITCH, GRAY 13-PIN PLUG, PIN 3 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
PURPLE/WHITE (+) |
@ HEADLIGHT SWITCH or SJB, BLACK 22-PIN PLUG(D), PIN 5, SEE NOTE #2 |
| POWER LOCK |
GRAY/YELLOW (TYPE B) |
IN DRIVERS KICK PANEL or SJB, BLACK 32-PIN PLUG(C), PIN 5, SEE NOTE #2 |
| POWER UNLOCK |
PURPLE/GRAY (TYPE B) |
IN DRIVERS KICK PANEL or SJB, BLACK 32-PIN PLUG(C), PIN 9, SEE NOTE #2 |
| DOOR TRIGGER |
GREEN/PURPLE (-) |
IN DRIVERS KICK PANEL or SJB, BLACK 32-PIN PLUG(C), PIN 6, SEE NOTE #2 |
| DOMELIGHT
SUPERVISION |
GREEN/BLUE (+) |
@ SJB, BLACK 32-PIN PLUG(C), PIN 8, SEE NOTE #2 |
| TRUNK RELEASE |
N/A |
|
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
YELLOW/LT.GREEN ot YELLOW/RED (-) |
@ HORN SWITCH or SJB, BLACK 22-PIN PLUG(D), PIN 12, SEE NOTE #2 |
| TACH |
Any wire NOT BROWN/WHITE (AC) |
@ ANY FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
PURPLE/WHITE (+) |
@ BRAKE PEDAL SWITCH |
| FACTORY
ALARM DISARM |
N/A |
|
| ANTI-THEFT |
FORDS TRANSPONDER ANTI-THEFT, SEE NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791, use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website.
NOTE #2: The SJB,(SMART JUCTION BOX) is located in the PASSENGER KICK.
|
|
|
|
|
|
