Mercury  Mountaineer 2008-2010
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED(+) , YELLOW/RED(+) and BLUE/RED(+)   @ SJB, (BLACK 32-Pin Plug(E) Pins 32, 4 and 1, See Note #2
 STARTER  BLUE/WHITE (+)  @ IGNITION Switch, (BLACK 7-Pin Plug), Pin 7
 STARTER 2  N/A  
 IGNITION 1  WHITE/ORANGE (+)  @ IGNITION Switch, (BLACK 7-Pin Plug), Pin 1 or SJB, (GRAY 32-Pin Plug(C) Pin 26, See Note #2
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  PURPLE/GREEN (+)  @ IGNITION Switch, (BLACK 7-Pin Plug), Pin 6 or SJB, (GRAY 32-Pin Plug(C) Pin 5, See Note #2
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BLUE/WHITE (+)  in DRIVERS KICK PANEL or SJB, (BROWN, 32-Pin Plug(A) Pin 11, See Note #2
 POWER LOCK  GRAY/YELLOW (-) TYPE B  in DRIVERS KICK PANEL or SJB, (BLACK, 32-Pin Plug(B) Pin 27, See Note #2
 POWER UNLOCK  PURPLE/GRAY (-) TYPE B  in DRIVERS KICK PANEL or SJB, (BLACK, 32-Pin Plug(B) Pin 26, See Note #2
 DOOR TRIGGER  GREEN/PURPLE (-) N.C.  in DRIVERS KICK PANEL or SJB, (BLACK, 32-Pin Plug(B) Pin 17, See Note #2
 DOMELIGHT SUPERVISION  YELLOW/GRAY (+)  in DRIVERS KICK PANEL or SJB, (BROWN, 32-Pin Plug(A) Pin 8, See Note #2
 TRUNK RELEASE  BROWN (-) Note #3  in DRIVERS KICK PANEL or SJB, (BLACK, 32-Pin Plug(B) Pin 29, See Note #2
 SLIDING POWER DOOR  N/A  
 HORN  BLUE/WHITE (-)  @ HORN Switch or SJB, (GRAY, 32-Pin Plug(C) Pin 6, See Note #2
 TACH  Any wire NOT PURPLE (AC)  @ Any FUEL INJECTOR
 WAIT TO START LIGHT  N/A  
 BRAKE  PURPLE/WHITE (+)  @ BRAKE Switch or SJB, (BROWN, 32-Pin Plug(A) Pin 15, See Note #2
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  FORD's TRANSPONDER SYSTEM, See Note #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a Bypass module 791, use this module IF you have a extra ignition key to place inside the 791 to remote start, if you do not have an extra key to use or wish not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS MODULE that does not require a key to be placed inside the bypass module, this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS MODULE PAGE on this website. Note #2: The SJB,(Smart Junction Box) is located under the Drivers side of the Dash. Note #3: TEST this wire while opening the Glass hatch from the Handle on the Rear of the Vehicle.
一般来讲,女人过了发育期丰胸产品,想要丰胸就会比较困难,不过也不是不行能的粉嫩公主酒酿蛋,这个时候需要借助专业的丰胸产品,而且是健康有效的丰胸产品丰胸食物。添加WeChat获取免费一对一丰胸指导丰胸效果