Vehicle
Wiring Details for your
2011- Kia Sorento Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2011- Kia Sorento . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+), NOTE #2 |
@ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 1 |
| STARTER |
GREEN (+), NOTE #3 |
@ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 3 |
| STARTER
2 |
BLACK/ORANGE(+) and PINK(+), (PUSH to START Button) |
@ STAR/STOP BUTTON SWITCH, (BLACK, 10-PIN PLUG), PINS 1 and 7 |
| IGNITION
1 |
ORANGE (+), NOTE #4 |
@ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 4 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BLUE (+), NOTE #5 |
@ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 2 |
| ACCESSORY/HEATER
BLOWER 2 |
YELLOW (+), NOTE #6 |
@ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 6 |
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
BLUE (-) |
@ HEADLIGHT SWITCH, (WHITE, 13-PIN PLUG), PIN 2 |
| PARKING
LIGHTS ( + ) |
GREEN(+)(Left) and YELLOW(+)(Right), use both! |
@ DASH FUSE BOX, (WHITE, 39-PIN PLUG(A), PINS 11 and 7 |
| POWER LOCK |
BLUE/BLACK (TYPE B) |
@ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 4 |
| POWER UNLOCK |
GRAY/BLACK (TYPE B), NOTE #7 |
@ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 24 |
| DOOR TRIGGER |
GREEN/ORANGE (-) |
@ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 10 |
| DOMELIGHT
SUPERVISION |
BROWN (-) |
@ LEFT FRONT A Pillar, (WHITE, 22-PIN PLUG), PIN 1 |
| TRUNK RELEASE |
YELLOW/BLACK (-), NOTE #9 |
@ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 11 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
GRAY/BLACK to GRAY (-) |
in DRIVERS KICK PANEL, (WHITE, 15-PIN PLUG), PIN 6 |
| TACH |
Any wire NOT ORANGE or PINK/BLACK, (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
NOTE #10 |
@ BRAKE PEDAL SWITCH, (WHITE, 4-PIN PLUG), PIN 1 |
| FACTORY
ALARM DISARM |
PINK(-) and GRAY(-), use both, NOTE #8 |
@ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PINS 9 and 26 |
| ANTI-THEFT |
KIA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle May Be Equipped with KIA'S TRANSPONDER ANTI-THEFT SYSTEM,
check the OWNERS MANUAL for this vehcile or contact your HYUNDAI Dealer to see if
the vehicle has a Special programmed Ignition Key, if it does, then for REMOTE
STARTING you will need the 791 BYPASS Module and an Extra Ignition key.
To Order the 791 go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: on Vehicles with SMART KEY, this wire is located in the DRIVERS KICK PANEL,
(WHITE, 15-PIN PLUG), PIN 12
NOTE #3: on Vehicles with SMART KEY, this wire is a RED (+), located at the DASH FUSE BOX,
(WHITE, 8-PIN PLUG(C), PIN 4
NOTE #4: on Vehicles with SMART KEY, this wire is a GREEN (+), located at the DASH FUSE BOX,
(WHITE, 8-PIN PLUG(C), PIN 3
NOTE #5: on Vehicles with SMART KEY, this wire is located at the DASH FUSE BOX,
(WHITE, 8-PIN PLUG(C), PIN 2
NOTE #6: on Vehicles with SMART KEY, this wire is located at the DASH FUSE BOX,
(WHITE, 8-PIN PLUG), PIN 1
NOTE #7: to UNLOCK just the DRIVERS DOOR, use the YELLOW/BLACK (-), at the DASH FUSE
BOX, (REAR WHITE, (16-PIN PLUG(MM), PIN 2
NOTE #8: to DISARM, use the PINK (-), TYPE B, and the GRAY (-) use both wires,
will Require a Double Pulse. TEST these wires while turning the KEY in the Drivers Door.
NOTE #9: TEST this wire while Opening the TAILGATE with the Handle on the REAR of the Vehicle.
NOTE #10: the BRAKE wire is a YELLOW(+)(2.4L Engine) and a GREEN/BLACK(+)(3.5L Engine)
|
|
|
|
|
|
