Vehicle
Wiring Details for your
2008-2009 Smart Car Fortwo Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2009 Smart Car Fortwo . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED /WHITE (+) or RED (+) |
@ BACK of FUSE BOX, (BLACK, 3-PIN PLUG) |
| STARTER |
PURPLE (+) |
@ BACK of FUSE BOX, (BLACK, 2-PIN PLUG) |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
RED/BLACK (+) |
@ BACK of FUSE BOX, (BLACK, 2-PIN PLUG) |
| IGNITION
2 |
RED/ BLUE (+) |
@ BACK of FUSE BOX, (BLACK, 2-PIN PLUG) |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
GRAY/BLUE (+) |
@ HEADLIGHT SWITCH or BACK of FUSE BOX, (BLACK, 40-PIN PLUG) |
| POWER LOCK |
PINK (-), TYPE B, NOTE #1 |
@ SWITCH on DASH or BACK of FUSE BOX, (BLACK, 40-PIN PLUG) |
| POWER UNLOCK |
BLACK/BLUE (-), TYPE B |
@ SWITCH on DASH or BACK of FUSE BOX, (BLACK, 40-PIN PLUG) |
| DOOR TRIGGER |
N/A |
|
| DOMELIGHT
SUPERVISION |
BROWN/BLUE ( - ) |
@ BACK of FUSE BOX, (WHITE, 40-PIN PLUG) |
| TRUNK RELEASE |
PINK/YELLOW ( - ) |
@ BACK of FUSE BOX, (BLACK, 40-PIN PLUG) |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLUE (+), NOTE #2 |
@ BACK of FUSE BOX, (BROWN, 8-PIN PLUG) |
| TACH |
N/A |
|
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BLACK/WHITE (+) |
@ BACK of FUSE BOX, (WHITE, 40-PIN PLUG) |
| FACTORY
ALARM DISARM |
N/A |
|
| ANTI-THEFT |
(MAY BE EQUIPPED with) SMART CAR'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #3 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: Use a RELAY to ISOLATE this wire from the LOCK/UNLOCK Switch.
NOTE #2: the HORN will not function unless the IGNITION KEY is turned ON, do this to TEST.
NOTE #3: (MAY BE EQUIPPED with) SMART CAR'S TRANSPONDER ANTI-THEFT SYSTEM, check
owners manual of this vehicle for information, if equipped you will need a Part # 791
BYPASS MODULE and an extra ignition key for Remote Starter Operation.
To order the 791 go to the SECURITY BYPASS MODULE Page on this website.
|
|
|
|
|
|
