Vehicle
Wiring Details for your
2007-2009 Mini Cooper Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2009 Mini Cooper . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED/YELLOW (+) 40 AMP and RED/PURPLE (+) 40 AMP |
@ FRM, (51-PIN PLUG(X14260), PIN 2 and (51-PIN PLUG(X14261), PIN 34, NOTE #2 |
| STARTER |
WHITE (+) Low Current, (NOT for REMOTE STARTING!), NOTE #1 |
@ STARTER or CAS, (41-PIN PLUG(X10318), PIN 22, NOTE #3 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
GREEN (+) Low Current, (NOT for REMOTE STARTING!!), NOTE #1 |
@ JUNCTION BOX, (PLUG(X11006), PIN 7, NOTE #4 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
RED (+) Low Current, (NOT for REMOTE STARTING!!), NOTE #1 |
@ JUNCTION BOX, (PLUG(X11006), PIN 12, NOTE #4 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
BLACK/GREEN(+)(Left Front) and WHITE/BLUE(+)(Right Front), NOTE #5 |
@ FRM, (51-PIN PLUG(X14261), PIN 50 and 51-PIN PLUG(X14260), PIN 8, NOTE #2 |
| POWER LOCK |
YELLOW/RED (-), TYPE B |
@ CLIMATE CONTROL MODULE, (12-PIN PLUG), PIN 11 |
| POWER UNLOCK |
Use LOCK wire (-) TYPE B |
|
| DOOR TRIGGER |
BROWN/ORANGE (-) |
@ FRM, (51-PIN PLUG(X14261), PIN 24, NOTE #2 |
| DOMELIGHT
SUPERVISION |
BROWN/YELLOW (+) |
@ FRM, (51-PIN PLUG(X14260), PIN 35, NOTE #2 |
| TRUNK RELEASE |
BLUE/RED(-)(Hatchback) and WHITE(-)(Clubman), NOTE #6 |
@ JUNCTION BOX, (PLUG(X11002), PIN 24, NOTE #4 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BROWN/YELLOW (-) |
@ JUNCTION BOX, (PLUG(X11006), PIN 8, NOTE #4 |
| TACH |
WHITE (AC) |
@ Any FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
WHITE/BLACK (+), (TEST with IGNITION ON) |
@ BRAKE PEDAL SWITCH, (4-PIN PLUG), PIN 3 |
| FACTORY
ALARM DISARM |
BLUE/PURPLE (-), NOTE #7 |
@ FRM, (51-PIN PLUG(X14261), PIN 46, NOTE #2 |
| ANTI-THEFT |
MINI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: MINI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module,
DUE to the SPECIAL IGNITION CIRCUIT, BYPASS MODULE MUST BE USED!
Part # DLPK-CANBUS MULTI, for REMOTE START/KEYLESS ENTRY
NOTE #2: the FRM, (Footwell Module) is located in the DRIVERS KICK PANEL.
NOTE #3: the CAS, (Car Access System) is located in the TOP of the DRIVERS DASH.
NOTE #4: the JUNCTION BOX is located in the PASSENGER KICK PANEL.
NOTE #5: the LEFT REAR Parking light wire is BLUE (+) at FRM, (51-PIN PLUG(X14260), PIN 16 and the RIGHT REAR is a BLACK (+) at the FRM, (51-PIN PLUG(X14260), PIN 18, use all 4 wires and RELAY ISOLATE
NOTE #6: TEST this wire while OPENING the Hatch/Right Split Door from the Handle on the REAR
of the Vehicle.
NOTE #7: TEST this wire while TURNING the KEY in the DRIVERS DOOR.
|
|
|
|
|
|
