NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: The MICU (Multiiplex Integrated Control Unit) is attached to the FUSE/RELAY BOX,
located under the DRIVERS SIDE of the DASH, this Control Unit has (2) Plug on the
BACK of the FUSE/RELAY BOX
NOTE #3: The DRIVERS DOOR is a GREEN (-) at Pin 37, the PASSENGER DOOR is a LIGHT
GREEN (-) at Pin 3, the DRIVERS REAR DOOR is a BROWN (-) at Pin 17 and the
PASSENGER REAR DOOR is a GRAY (-) at Pin 2. When connecting to an ALARM
SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM
NOTE #4: TEST this wire while turning the Key in the Drivers Door Key Cylinder it will show
(-) Negative in the Unlock position.
|