Vehicle
Wiring Details for your
2011- Dodge Journey Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2011- Dodge Journey . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
RED (+) |
@ BCM, LT.GRAY 4-PIN PLUG(C2), PIN 3, SEE NOTE #2 |
STARTER |
LT.BLUE/TAN (+) for STARTER KILL ONLY!! |
@ BCM, BLACK 24-PIN PLUG(C1), PIN 19, SEE NOTE #2 |
STARTER
2 |
PURPLE/LT.BLUE (?) |
@ KEYLESS IGNITION NODE (START/STOP Button) BLACK 6-PIN PLUG, PIN 4 |
IGNITION
1 |
PINK/WHITE (+) |
@ BCM, BLACK 48-PIN PLUG(C5), PIN 27, SEE NOTE #2 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
N/A |
|
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
EHITE/BROWN (-) THRU a 1130 Ohm resistor, use a Relay to ISOLATE Switch |
@ BCM, BLUE 24-PIN PLUG(C7), PIN 20, SEE NOTE #2 |
PARKING
LIGHTS ( + ) |
SEE NOTE #3 |
@ BCM, SEE NOTE #2 |
POWER LOCK |
PURLE/LT. GREEN (-) THRU a 330 Ohm Resistor will LOCK |
@ BCM, BLACK 48-PIN PLUG(C6), PIN 23 (without One-Touch up Windows) SEE NOTE #2 |
POWER UNLOCK |
using same wire, a (-) THRU a 100 Ohm Resistor will UNLOCK |
DIAGRAM |
DOOR TRIGGER |
PURPLE (-) |
@ BCM, BLACK 48-PIN PLUG(C6), PIN 25, SEE NOTE #2 |
DOMELIGHT
SUPERVISION |
YELLOW/PURPLE (+) |
@ BCM, BLUE 24-PIN PLUG(C7), PIN 14 SEE NOTE #2 |
TRUNK RELEASE |
N/A |
|
SLIDING
POWER DOOR |
N/A |
|
HORN |
DK.GREEN/WHITE (+) |
@ BCM, BLACK 24-PIN PLUG(C1), PIN 23, SEE NOTE #2 |
TACH |
BROWN/YELLOW, BROWN/DK.BLUE, BROWN/LT.BLUE, BROWN/TAN, BROWN/ORANGE or BROWN/PURPLE (AC) |
@ Any FUEL-INJECTOR, 2-PIN PLUG, PIN 2 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
DK.GREEN/WHITE (+) |
@ BCM, WHITE 24-PIN PLUG(C4), PIN 18, SEE NOTE #2 |
FACTORY
ALARM DISARM |
N/A |
|
ANTI-THEFT |
NO INFORMATION AT THIS TIME!! See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: There is NO INFORMATION on the ANTI-THEFT SYSTEM or an INTERFACE BYPASS
MODULE for this vehicle AT THIS TIME!!
NOTE #2: The BCM is located Behind the GLOVE BOX.
NOTE #3: The LEFT FRONT Parkinglight wire is a WHITE/BROWN (+) @ BCM, BLACK 24-PIN
PLUG(C1) PIN 4, the RIGHT FRONT Parking light wire is a WHITE/ORANGE (+) @ BCM,
WHITE 24-PIN PLUG(C4) PIN 3, the LEFT REAR Parking light wire is a WHITE/GRAY
(+) @ BCM, BLACK 48-PIN PLUG(C6) PIN 32 and the RIGHT REAR Parking light wire is
a WHITE/ORANGE (+) @ BCM, BLACK 48-PIN PLUG(C5) PIN 4, when connecting use
a relay for each to isolate.
|
|
|
|
|